Buscar
INICIO > ADAPTADORES Y FUENTES DE ALIMENTACIÓN > FUENTES DE ALIMENTACIÓN CONMUTADAS PARA EL USO INDUSTRIAL > FUENTES DE ALIMENTACIÓN INDUSTRIALES DE CONMUTACIÓN - MEAN WELL
SWITCHING POWER SUPPLY - SINGLE OUTPUT - 35W - 24 V
 

SWITCHING POWER SUPPLY - SINGLE OUTPUT - 35W - 24 V

< >
 
 

Ref. APV-35-24

constant voltage mode power supply • universal AC input / full range • resists 300 VAC surge input for 5 seconds • protection against: short circuit / overload / over voltage • cooling: free air convection • small and compact size • fully isolated plastic case • IP30 design • pass LPS • suitable for LED lighting and moving sign applications • low cost, high reliability • 100% full load burn-in test • 2 years warranty • PARA EL USO PROFESIONAL • La instalación debe ser realizada por un técnico cualificado.
OUTPUT: •• tensión DC: 24V •• corriente nominal: 1.5A •• rango de corriente: 0~1.5A •• RATED POWER: 36W •• RIPPLE & NOISE (max) Note. 2: 180mVp-p •• VOLTAGE TOLERANCE Note.3: +/-5.0% •• regulación de línea: +/-1.0% •• regulación de carga: +/-2.0% •• SETUP, RISE TIME Note.6: 1500ms, 40ms / 230VAC 1500ms,40ms / 115VAC at full load •• tiempo de mantenimiento (típ.): 20ms/230VAC 12ms/115VAC at full load • entrada: •• VOLTAGE RANGE Note.4: 90~264VAC 127~370VDC •• rango de frecuencia: 47~63Hz •• eficiencia (típ.): 84% •• corriente AC (típ.): 0.5A/230VAC 0.75A/115VAC •• INRUSH CURRENT(max.): COLD START 45A (twidth=440µs measured at 50% lpeak) at 230VAC •• corriente de fuga: 0.25mA/240VAC • protección: •• sobrecarga: ••• 110~160% rated output power ••• Protection type : Hiccup mode, recovers automatically after fault condition is removed •• OVER VOLTAGE: ••• 27~32.4V ••• Protection type : Shut down o/p voltage, re-power on to recover • ambiente: •• WORKING TEMP.: -30~70°C (referring to´ Derating curve´) •• humedad de funcionamiento: 20 ~ 90% RH non-condensing •• STORAGE TEMP., HUMIDITY: -40 ~ +80°C, 10 ~ 95% RH •• TEMP. COEFFICIENT: +/-0.03%/°C(0 ~ 50°C) •• vibraciones: 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes • seguridad & EMC: •• SAFETY STANDARDS: UL8750 , CSA-C22.2 No. 250.0-13 approved, design refer to EN60950-1 •• tensión de aislamiento: I/P-O/P:3KVAC •• SOLATION RESISTANCE: I/P-O/P:>100M Ohms / 500VDC / 25°C/ 70% RH •• EMC EMISSION: Compliance to EN55022,EN61000-3-2 Class A,EN61000-3-3 •• EMC IMMUNITY: Compliance to EN55024,EN61000-4-2,3,4,5,6,8,11, light industry level(surge 2KV), criteria A • OTHERS: •• MTBF: 692.8K hrs min. MIL-HDBK-217F (25°C) •• dimensiones: 84*57*29.5mm (L*W*H) •• embalaje: 0.18Kg, 72pcs / 14Kg/ 0.92CUFT
Compartir

www.kooper.es - EDC Kooper International S.A. - Calle Concepción, 2- 47003 Valladolid - Tel. 693 699 176 - info@kooper.es

Aviso legal | Política de privacidad
 
 
kooper.es utiliza cookies. Cerrar(X)